From af591782f036c5558ba4b116d8fe47b2e9f392d8 Mon Sep 17 00:00:00 2001
From: Christian Hodgden <chrhodgden@gmail.com>
Date: Wed, 2 Oct 2024 17:37:37 -0500
Subject: candlestick molds > taper block: renamed and sized wick hole
---
candlestick_molds/taper.scad | 55 --------------------------------------------
1 file changed, 55 deletions(-)
delete mode 100644 candlestick_molds/taper.scad
(limited to 'candlestick_molds/taper.scad')
diff --git a/candlestick_molds/taper.scad b/candlestick_molds/taper.scad
deleted file mode 100644
index cabc2cc..0000000
--- a/candlestick_molds/taper.scad
+++ /dev/null
@@ -1,55 +0,0 @@
-
-use <../lib/bezier.scad>;
-
-$fn = 100;
-base_radius = 7/8;
-top_radius = base_radius * 0.75;
-top_height = top_radius * 2;
-total_height = 10;
-stem_height = total_height - top_height;
-
-module stick() {
- cylinder(stem_height, base_radius, top_radius);
-
- control_points = [
- [top_radius, 0],
- [0.25, 0.5],
- [0.4, top_height],
- [0, top_height]
- ];
- // adjust curve_facets for low & odd $fn values
- curve_facets = $fn/2;
- head_curve = bezier_curve(control_points, $fn=curve_facets);
- top_curve = concat(head_curve, [[0, 0]]);
-
- translate([0, 0, stem_height])
- rotate_extrude()
- polygon(top_curve);
-
- translate([0, 0, total_height-0.01])
- cylinder(2, 0.05);
-};
-
-difference() {
- difference() {
- // Base Mold Block
- translate([-1.5, -1.5, 0.01])
- cube([6, 6, total_height]);
-
- // Mold of each stick
- translate([0, 0, 0]) stick();
- translate([3, 0, 0]) stick();
- translate([0, 3, 0]) stick();
- translate([3, 3, 0]) stick();
- };
-
- // Cut Molds in half
- // Print 2 of these to form full mold
- translate([-1.51, -1.51, 0])
- cube([6.02, 1.51, total_height + 0.02]);
- translate([-1.51, 3, 0])
- cube([6.02, 1.51, total_height + 0.02]);
-
-
-};
-
--
cgit v1.2.3